Close-up of a green gas compressor skid with red engine control panel

Precise Pressure Delivery · Manual Pressure Skid · 24/7 Dispatch

Pressure Reduction & Control Services — Oklahoma & Texas

Not every compression job is about unloading a well or boosting production. Sometimes what you need is gas delivered at a specific, steady pressure — to your production equipment, your pipeline system, or your facility — and held there reliably for the duration of the job.

Eco-Lift provides mobile pressure reduction and control services across all of Oklahoma and Texas. We deliver compressed natural gas at the exact pressure and flow rate your equipment requires, on a day-rate basis with no contract required.

What Is Pressure Reduction & Control?

Pressure reduction and control is the process of taking high-pressure gas and delivering it at a lower, regulated pressure to match the inlet requirements of downstream equipment. Where a booster compressor raises pressure, a pressure reduction skid brings it down — and holds it precisely at the level the receiving equipment, pipeline, or production system requires.

It sounds straightforward, but the precision matters. Equipment running above its design inlet pressure is a safety risk. Equipment starved of pressure underperforms or fails to operate entirely. Getting the right pressure to the right piece of equipment at the right flow rate is what this service is built to do.

Eco-Lift’s trailer-mounted pressure reduction and control equipment is self-contained and field-deployable — brought directly to your location, connected to your system, and operated at the specifications your application requires.

When You Need Pressure
Reduction & Control

Supplying Gas to Production Equipment at a Required Inlet Pressure

Separators, heater treaters, line heaters, chemical injection systems, and other production equipment all operate within specific pressure ranges. When your available gas supply pressure is higher than what the equipment requires, you need regulated delivery — not raw high-pressure gas fed directly into the system.

Pipeline Pressure Management

When high-pressure gas needs to enter a lower-pressure gathering or sales line, a pressure reduction skid manages the step-down and controls flow rate to match what the downstream line can accept. This is common during tie-in operations, pipeline maintenance work, and system commissioning.

Long-Term Lift and Production Support

Eco-Lift's manual pressure skid provides a longer-term pressure control solution for wells and facilities that require ongoing, regulated pressure management as part of their production lift strategy. Where a one-time stimulation isn't the answer, a pressure control skid on location provides continuous, managed pressure support.

Workover and Recompletion Support

During well intervention operations, controlling wellhead and surface pressure precisely is critical for safety and for protecting the integrity of the wellbore and completion. Mobile pressure reduction equipment on location gives the workover crew a controlled, reliable pressure source throughout the operation.

The Manual Pressure Skid

Eco-Lift’s manual pressure control skid is a self-contained, field-deployable unit designed for applications that require sustained, precise pressure management rather than a short-duration stimulation or boost. It delivers gas at the specified pressure and flow rate, held manually to the operating parameters the job requires.

It’s the right tool for production situations where ongoing pressure support is part of the lift strategy — where the well or facility needs regulated pressure delivered consistently over an extended period rather than a single compression event.

As with all of our equipment, the pressure skid is deployed on a day-rate basis with no contract or long-term commitment required.

Equipment & Capabilities

Maximum Pressure

5,100 PSIG

Maximum Flow Rate

2 MMSCFD

Mounting

Trailer-mounted, self-contained

Power Source

Natural gas powered

Pressure Control

Manual pressure skid available for sustained, long-term pressure management applications

Certifications

Oklahoma Safety Council logo
National Safety Council logo
Energy Training Council (ETC) logo
SafeLandUSA logo
Veriforce logo
PEC Premier SSQ Participant logo
ISNetworld member contractor logo

Call us with your inlet pressure requirements, target delivery pressure, and flow rate. We’ll confirm the right equipment for your application before we dispatch.

How It Works

Step 1Tell Us Your Pressure Requirements

Our trailer-mounted, self-contained compressor unit arrives at your well site ready to work. We operate across all of Oklahoma and all of Texas — from the Anadarko Basin and STACK/SCOOP plays to the Permian Basin and Eagle Ford. If your well is in the field, we can get to it.

Step 2We Dispatch the Right Equipment

We select the right unit from our fleet for your pressure range and flow requirements and mobilize to your location anywhere in Oklahoma or Texas. Our equipment is available 24 hours a day.

Step 3We Connect and Set Operating Parameters

On arrival we connect to your system and set suction pressure, discharge pressure, and flow rate to the specifications your application requires. For manual pressure skid deployments we establish and hold the target delivery pressure for the duration of the job.

Step 4Steady, Regulated Delivery

Your downstream equipment receives gas at the required pressure and flow rate for the duration of the job. When the scope is complete, we release the equipment and invoice for the time on location. No contract to close out, no lingering obligations.

Who We Serve

Service pickups and crew on location at a red-dirt well site

Production
engineers

managing facilities and production equipment that require regulated gas inlet pressure — separators, line heaters, chemical injection systems, and other pressure-sensitive surface equipment.

Tan natural gas compressor package mounted on a trailer

Pipeline operators and
facility managers

who need controlled pressure step-down during tie-in operations, maintenance windows, or system commissioning.

Rear of a mobile compressor trailer with cooler fan on a red-dirt lease road

Lease
operators

whose wells require ongoing pressure management as part of their lift strategy and need a reliable mobile pressure control solution without committing to a permanent installation.

Green gas compression package on a flatbed trailer

Workover and well
service companies

who need precise wellhead and surface pressure control during intervention operations to protect personnel, equipment, and wellbore integrity.

Mobile gas compressor package mounted on a flatbed trailer

E&P operations
teams

at major and mid-major operators who need a credentialed, pre-qualified pressure control contractor for approved location work.

Frequently Asked Questions

What is the difference between pressure reduction and compression?

Compression raises gas pressure — it takes low-pressure gas and delivers it at a higher pressure. Pressure reduction does the opposite — it takes high-pressure gas and delivers it at a lower, regulated pressure to match the requirements of downstream equipment. Both services use mobile field equipment and are available on a day-rate basis. The right choice depends on whether your application needs more pressure or less.

A manual pressure skid is a self-contained pressure control unit that delivers gas at a specified pressure and flow rate, held manually to the operating parameters the job requires. It’s used in applications where sustained, ongoing pressure management is needed rather than a short-duration compression event — for example, as part of a long-term lift strategy on a well that requires continuous regulated pressure support.

Call us with your required delivery pressure and flow rate and we’ll tell you what we can hold for your specific application. The answer depends on the equipment configuration and the operating conditions at your location.

No contract required. All of our services operate on a 24-hour day rate with no minimum commitment. Whether you need pressure control for a single day or an extended production period, the terms are the same.

Yes. That’s the core application for this service. Give us the inlet pressure specification for your equipment and your required flow rate when you call and we’ll confirm the right unit for the job before we dispatch.

Yes. Eco-Lift holds active credentials with ISN, PEC Premier, SafeLandUSA, the National Safety Council, the Energy Training Council, and the Oklahoma Safety Council, and is HAZMAT certified. These cover the pre-qualification requirements for most major and mid-major E&P operators working in Oklahoma and Texas.

Yes. We serve all of Texas in addition to all of Oklahoma. Call 580-772-5158 to discuss your Texas location and confirm equipment availability and mobilization time.

Request Quote